Technical: Engineering, Maintenance & HSE

ExMaC courses, seminars and programs give delegates the change to develop the wider skills and creativity that the modern workplace demands.

S.NO.
PROGRAM TITLE
DATE
VENUE
FEES US$
IT1 Troubleshooting Instrumentation & Control Systems
23 – 27/1/2010
Cairo
2990
IT2 Power System Operation
23 – 27/1/2010
Cairo
2990
IT3 Mechanical Properties of PWR Reactor Plant System Materials
23 – 27/1/2010
Cairo
2990
IT4 Operation & Maintenance of Valves in Water Networks
24 – 28/1/2010
Abu Dhabi
3200
IT5 Pump Troubleshooting
24 – 28/1/2010
Abu Dhabi
3200
IT6 Industrial Equipment Compressors, Pumps & Motors
24 – 28/1/2010
Abu Dhabi
3200
IT7 Reservoir Engineering & Management: Analysis, T Characterization, Simulation, Integration, Statistics & Naturally Fractured
30/1 – 3/2/2010
Cairo
2990
IT8 Uninterruptible Power Supply UPS) Selection, Installation, Maintenance & Operation
30/1 – 3/2/2010
Cairo
2990
IT9 Pumps And Turbine Maintenance
Reliability = Profitability
31/1 – 4/2/2010
Abu Dhabi
3200
IT10 Vibration Analysis
6 – 10/2/2010
Cairo
2990
IT11 Maintenance Improvement for Managers and Supervisors
6 – 10/2/2010
Cairo
2990
IT12 Power System Analysis Using PC
6 – 10/2/2010
Cairo
2990
IT13 Control & Safety Relief Valves: Operation, Selection & Troubleshooting
7 – 11/2/2010
Abu Dhabi
3200
IT14 Computized Condition Monitoring
13 – 17/2/2010
Cairo
2990
IT15 Shaft Alignment & Vibration Analysis
13 – 17/2/2010
Cairo
2990
IT16 Pumps & Pressurized Piping Systems Performance , Computer Selection & Application
13 – 17/2/2010
Cairo
2990
IT17 Power system grounding
14 – 18/2/2010
Abu Dhabi
3200
IT18 Industrial Boilers “Operation - Maintenance
20 – 24/2/2010
Cairo
2990
IT19 Sub-station Safety
20 – 24/2/2010
Cairo
2990
IT20 Safe Operation & Maintenance of Circuit Breakers and Switchgears
20 – 24/2/2010
Cairo
2990
IT21 The Advanced Rotating Equipment Troubleshooting
21 – 25/2/2010
Abu Dhabi
3200
IT22 Accident Investigation & Analysis for Safety, Health & Security Professionals Practical Techniques
21 – 25/2/2010
Abu Dhabi
3200
IT23 Handling Chemicals – Design For Safe Handling
21 – 25/2/2010
Abu Dhabi
3200
IT24 Advanced Process Control
27/2 – 3/3/2010
Cairo
2990
IT25 Process Reactors: OPERATION, TROUBLESHOOTING, START-UP & SHUTDOWN: Hydro-Treating, Catalytic Reforming & Hydro-Cracking
27/2 – 3/3/2010
Cairo
2990
IT26 Advanced Maintenance Management: Planning, Scheduling and Control
28/2– 4/3/2010
Abu Dhabi
3200
IT27 Power System Reliability
28/2– 4/3/2010
Abu Dhabi
3200
IT28 Pressure Vessel Integrity through Design Operation Maintenance
28/2– 4/3/2010
Abu Dhabi
3200
IT29 Distribution System Planning in Electrical Network
6 – 10/3/2010
Cairo
2990
IT30 Root Cause Failure Analysis (RCFA): Methods and Techniques
6 – 10/3/2010
Cairo
2990
IT31 HSE Audit & Site Inspection
6 – 10/3/2010
Cairo
2990
IT32 Heat Exchangers: Shell and Tube Heat Exchangers Design, Operation, Control and Troubleshooting
7– 11/3/2010
Abu Dhabi
3200
IT33 Pumps Testing & Performance Curve Using PC
13 – 17/2/2010
Cairo
2990
IT34 Computer Management  Maintenance Systems
( CMMS )
13 – 17/2/2010
Cairo
2990
IT35 FIDIC Construction Contracts
13 – 17/2/2010
Cairo
2990
IT36 Heat Exchangers: Shell And Tube Heat Exchangers Design, Operation, Control And Troubleshooting
14 – 18/2/2010
Abu Dhabi
3200
IT37 Maintenance Management Best Practices: Systems, Tools & Techniques
14 – 18/2/2010
Abu Dhabi
3200
IT38 Protective Relaying and Equipment Protection
14 – 18/2/2010
Abu Dhabi
3200
IT39 Power Transformers Design Manufacture Testing Operation & Maintenance
20– 24/3/2010
Cairo
2990
IT40 Electrical, Control & Instrumentation Engineering
20– 24/3/2010
Cairo
2990
IT41 Maintenance Planning, Scheduling & Work Control
21 – 25/3/2010
Abu Dhabi
3200
IT42 Fleet Planning, Maintenance And Management
21 – 25/3/2010
Abu Dhabi
3200
IT43 Piping & valves: Design, Construction Operation & Integrity
27 – 31/3/2010
Cairo
2990
IT44 Maintenance Technology Best Practices: Inspection, Analysis & Monitoring
27 – 31/3/2010
Cairo
2990
IT45 Control  Safety Relief Valves; Operation, Selection & Troubleshooting
27 – 31/3/2010
Cairo
2990
IT46 Electrical Power Systems Quality & Troubleshooting
27 – 31/3/2010
Cairo
2990
IT47 Reactive Power Management and Power Factor Correction :
27 – 31/3/2010
Cairo
2990
IT48 Design, Operation & Maintenance of Water Networks Pipelines
27/2 – 3/3/2010
Cairo
2990
IT49 Liquid & Gas Flow metering
27/2 – 3/3/2010
Cairo
2990
IT50 Electrical Maintenance and Inspection
28/3 – 1/4/2010
Abu Dhabi
3200
IT51 Fundamentals of Process Control & Instrumentation
28/3 – 1/4/2010
Abu Dhabi
3200
IT52 Power System: Computerized Protection, Automation, Economic Operation & Load Dispatch
3 – 7/4/2010
Cairo
2990
IT53 Construction Site Management & Project Administration
3 – 7/4/2010
Cairo
2990
IT54 Condition Monitoring  & Vibration Control of Machines Plants
3 – 7/4/2010
Cairo
2990
IT55 Piping Design, Construction And Mechanical Integrity
3 – 7/4/2010
Cairo
2990
IT56 Electrical Safety for Non Electricians
4 – 8/4/2010
Abu Dhabi
3200
IT57 Maintenance Management & Technology - A to Z of Best Practices ™
4 – 8/4/2010
Abu Dhabi
3200
IT58 Pipeline Design & Fabrication
10 – 14/4/2010
Cairo
2990
IT59 Cathodic Protection- Theory, Design Installation, Commissioning and Trouble Shooting
10 – 14/4/2010
Cairo
2990
IT60 Mechanical Aspects of Centrifugal Compressor
10 – 14/4/2010
Cairo
2990
IT61 Corrosion in the Petrochemical Industry
10 – 14/4/2010
Cairo
2990
IT62 Mechanical Aspects of Centrifugal Compressor
11 – 15/4/2010
Dubai
3200
IT63 Centrifugal Compressor and steam Turbines – DESIGN, OPERATION & MAINTENANCE
11 – 15/4/2010
Abu Dhabi
3200
IT64 Mechanical & Design Engineering
17 – 21/4/2010
Cairo
2990
IT65 Design Of Electrical Distribution System Using Computers
17 – 21/4/2010
Cairo
2990
IT66 Pumps & Presusurized Piping Systems Performance , Computer Selection & Application
17 – 21/4/2010
Cairo
2990
IT67 Advanced Process Control & Loop Tuning
17 – 21/4/2010
Cairo
2990
IT68 LV/MV/HV Circuit breakers (Switchgear): Inspection, Maintenance, Design, Repair & Troubleshooting
17 – 21/4/2010
Cairo
2990
IT69 HV and LV Power System Protection
17 – 21/4/2010
Cairo
2990
IT70 Maintenance Improvement for Managers and Supervisors
18 – 22/4/2010
Abu Dhabi
3200
IT71 HV & LV Switchgear
18 – 22/4/2010
Abu Dhabi
3200
IT72 Turbo – Generator Power Plants (Operation & Control
24– 28/4/2010
Cairo
2990
IT73 Safe Handling, Operation & Maintenance of Electrical Equipment in Hazardous Areas & Classification
24– 28/4/2010
Cairo
2990
IT74 Operation & Maintenance of Pumps in Water Networks
24– 28/4/2010
Cairo
2990
IT75 Machinery Bearing Lubrication & Reliability (Tribology)
24– 28/4/2010
Cairo
2990
IT76 Electrical Maintaining Commissioning & Troubleshooting
25 – 29/4/2010
Abu Dhabi
3200
IT77 Advanced Techniques for Effective Preventive & Predictive Maintenance
25 – 29/4/2010
Abu Dhabi
3200
IT78 Applying Statistical Process Control in the Laboratory
1 – 5/5/2010
Cairo
2990
IT79 Centrifugal Compressors & Turbines Design Operation
1 – 5/5/2010
Cairo
2990
IT80 High Voltage Operational Safety for Engineers & Technicians (OSHA, NFPA & EN Standards)
1 – 5/5/2010
Cairo
2990
IT81 Chemical & Hazmat Handling
1 – 5/5/2010
Cairo
2990
IT82 Pumps And Compressors: Design, Operation, Maintenance & Troubleshooting
1 – 5/5/2010
Cairo
2990
IT83 Electrical Power Systems Quality & Troubleshooting
1 – 5/5/2010
Cairo
2990
IT84 Laboratory Quality Management (ISO17025): SOP, Accreditation, Documentation and Auditing
1 – 5/5/2010
Cairo
2990
IT85 Preventive & Productive Maintenance for Overhead Lines
2 – 6/5/2010
Abu Dhabi
3200
IT86 Advanced Gas Chromatography Techniques & Troubleshooting
2 – 6/5/2010
Abu Dhabi
3200
IT87 Power Generation Commissioning Operations Maintenance
2 – 6/5/2010
Dubai
3200
IT88 Electrical Maintenance and Inspection
2 – 6/5/2010
Abu Dhabi
3200
IT89 Process Control & Instrumentation
8 – 12/5/2010
Cairo
2990
IT90 Computerized Maintenance Management Systems CMMS Answer or a Tool?
8 – 12/5/2010
Cairo
2900
IT91 Heat Exchangers: Shell And Tube Heat Exchangers Design, Operation, Control And Troubleshooting
8 – 12/5/2010
Cairo
2990
IT92 Switchgears & Circuit Breakers for Electrical Protection
8 – 12/5/2010
Cairo
3200
IT93 Periodical Maintenance for Buildings
( for Engineers & Technicians )
9 – 13/5/2010
Abu Dhabi
3200
IT94 Switchgears & Circuit Breakers for Electrical Protection
9 – 13/5/2010
Abu Dhabi
2990
IT95 Construction Site Management & Supervision
9 – 13/5/2010
Abu Dhabi
3200
IT96 Cathodic Protection- Theory, Design Installation, Commissioning & Trouble Shooting
15 – 19/5/2010
Cairo
2990
IT97 Hazard Identification & Assessment: Qualitative and Quantitative Methods
15 – 19/5/2010
Cairo
2990
IT98 Selection Operation & Maintenance of Valves
15 – 19/5/2010
Cairo
2990
IT99 Maintenance Technology Best practices: Inspection, Analysis & Monitoring
15 – 19/5/2010
Cairo
2990
IT100 Control & Safety Relief Valves, Selection Operation & Troubleshooting
15 – 19/5/2010
Cairo
2990
IT101 Transportation & Road Infrastructure Management & Life Cycle Cost Analysis
16 – 20/5/2010
Abu Dhabi
3200
IT102 Reaction Power Management & Power Factor Improvement
16 – 20/5/2010
Abu Dhabi
3200
IT103 Mechanical Equipment: Control Valves, Actuators & Pumps Selection, Calculations, Sizing, Applications, Operation, Diagnostic Testing, Troubleshooting & Maintenance
22 – 26/5/2010
Cairo
2990
IT104 Fault Finding in Electrical Circuit & Equipment
22 – 26/5/2010
Cairo
2990
IT105 Measuring Instruments Monitoring & Calibration
22 – 26/5/2010
Cairo
2990
IT106 Gas Turbine Mechanical Maintenance
22 – 26/5/2010
Cairo
2990
IT107 Plant Reliability Centered Maintenance (RCM) 
23 – 27/5/2010
Dubai
3200
IT108 Power Electronics: Devices, Control, Applications, Maintenance & Testing
23 – 27/5/2010
Abu Dhabi
3200
IT109 Computerized Maintenance Management Systems CMMS Answer or a Tool?
29/5 – 2/6/2010
Cairo
2990
IT110 Construction Site Management & Supervision – Advanced Techniques
29/5 – 2/6/2010
Cairo
2990
IT111 Rewinding & Maintenance of Electric Motors & Generator Alternator
29/5 – 2/6/2010
Cairo
2990
IT112 Mechanical Aspects of Centrifugal Compressor
29/5 – 2/6/2010
Cairo
2990
IT113 Machinery Vibration Monitoring & Analysis
30/5 – 3/6/2010
Dubai
3200
IT114 The Advanced Rotating Equipment Troubleshooting
30/5 – 3/6/2010
Abu Dhabi
3200
IT115 Electrical Equipment & Control Systems; Commissioning, Testing & Start up of Electrical Systems
5 – 9/6/2010
Cairo
2990
IT116 Natural Gas Processing, Gas Sweetening & Sulphur Recovery
5 – 9/6/2010
Cairo
2990
IT117 Generators: Operations, Maintenance, Control, Testing and Troubleshooting
5 – 9/6/2010
Cairo
2990
IT118 Steam Turbines Operation & Maintenance
5 – 9/6/2010
Cairo
2990
IT119 Pumps & Presusurized Piping Systems Performance , Computer Selection & Application
5 – 9/6/2010
Cairo
2990
IT120 Turbo – Generator Power Plants
(Operation and Control)
5 – 9/6/2010
Cairo
2990
IT121 Accident Analysis Investigations and Reporting
6 – 10/6/2010
Abu Dhabi
3200
IT122 Industrial Equipment: COMPRESSORS, PUMPS, MOTORS and VARIABLE-SPEED DRIVES: Selection, Sizing, Applications, Operation, Diagnostic Testing, Troubleshooting & Maintenance
6 – 10/6/2010
Abu Dhabi
3200
IT123 Piping Fitness for Service, Pressure Vessel FFS for Inspectors
6 – 10/6/2010
Abu Dhabi
3200
IT124 Practical Machinery Vibration Monitoring, Analysis & Predictive Maintenance
6 – 10/6/2010
Abu Dhabi
3200
IT125 Basic Process Control
12 – 16/6/2010
Cairo
2990
IT126 Emergency Shutdown & Operations; Applied Technology & Procedures
12 – 16/6/2010
Cairo
2990
IT127 Installation & Troubleshooting of MV Overhead Distribution Lines
12 – 16/6/2010
Cairo
2990
IT128 Electrical Metering Applications, Maintenance &New Technologies
12 – 16/6/2010
Cairo
2990
IT129 Refinery operations Troubleshooting
12 – 16/6/2010
Cairo
2990
IT130 Heat Exchangers: Shell And Tube Heat Exchangers Design, Operation, Control And Troubleshooting
13 – 17/6/2010
Abu Dhabi
3200
IT131 Machinery Failure Analysis & Prevention
13 – 17/6/2010
Abu Dhabi
3200
IT132

Mechanical Integrity & Reliability in Refineries, Petrochemical & Process Plants
13 – 17/6/2010
Dubai
3200
IT133 Safe Handling, Operation & Maintenance of Electrical Equipment
13 – 17/6/2010
Dubai
3200
IT134 Distribution System Planning in Electrical Network
19 – 23/6/2010
Cairo
2990
IT135 Reliability, Availability, Maintainability Study (RAM)
19 – 23/6/2010
Cairo
2990
IT136

Practical Shutdown & Turnaround Management for Engineers and Managers
19 – 23/6/2010
Cairo
2990
IT137 Advance Process Control Operation & Troubleshooting
19 – 23/6/2010
Cairo
2990
IT138 Industrial Equipment: COMPRESSORS, PUMPS, MOTORS & VARIABLE-SPEED DRIVES: Selection, Sizing, Applications, Operation, Diagnostic Testing, Troubleshooting & Maintenance
19 – 23/6/2010
Cairo
2990
IT139 Advanced Power Electronics: Technology & Applications
19 – 23/6/2010
Cairo
2990
IT140 Advance Power Generation & Distribution
20 – 24/6/2010
Abu Dhabi
3200
IT141 Power Transformers Design Manufacture Testing Operation & Maintenance
20 – 24/6/2010
Abu Dhabi
3200
IT142 Advanced Process Risk Assessment Management
26 – 30/6/2010
Cairo
2990
IT143 Installation, Calibration & Maintenance of Power Consumption Meters & telemeters
26 – 30/6/2010
Cairo
2990
IT144 Preventive & Productive Maintenance for Overhead Lines
26 – 30/6/2010
Cairo
2990
IT145 Electrical Maintenance, Testing, Inspection and Risk Assessment
26 – 30/6/2010
Cairo
2990
IT146 Rotating Equipment Predictive & Preventive Maintenance
26 – 30/6/2010
Cairo
2990
IT147 Fault Diagnosis of Pumps, Turbines & Compressor
26 – 30/6/2010
Cairo
2990
IT148 Maintenance & Reliability Management: Planning, Estimating, Scheduling & Control (Cost Effective Maintenance Management)
27/6 – 1/7/2010
Dubai
3200
IT149 Measuring Instruments Monitoring & Calibration
27/6 – 1/7/2010
Dubai
3200
IT150 Computerized Maintenance Management Systems CMMS Answer or a Tool?
3 – 7/7/2010
Cairo
2990
IT151 Electrical Power Distribution Planning & Control
3 – 7/7/2010
Cairo
2990
IT152 Road Pavement Projects Design, Construction & Maintenance
3 – 7/7/2010
Cairo
2990
IT153 Testing, Commissioning & Start-Up of Electrical & Control Systems
3 – 7/7/2010
Cairo
2990
IT154 Troubleshooting, Maintenance and Protection of AC Electrical Motors and Drives
3 – 7/7/2010
Cairo
2990
IT155

Troubleshooting Plant Rotating Equipment and Effective Predictive Maintenance
3 – 7/7/2010
Cairo
2990
IT156 Maintenance of Circuit Breakers &Transformers
4 – 8/7/2010
Abu Dhabi
3200
IT157 Mechanical Seals for Pumps & Compressors in Service
4 – 8/7/2010
Abu Dhabi
3200
IT158 Gear Boxes: Selection, Inspection, Maintenance, Troubleshooting & Repair
4 – 8/7/2010
Dubai
3200
IT159 Centrifugal Compressors & Operation & Maintenance
4 – 8/7/2010
Abu Dhabi
3200
IT160 Process Control & Instrumentation
10 – 14/7/2010
Cairo
2990
IT161 Power Distribution Systems: Planning & Performance
10 – 14/7/2010
Cairo
2990
IT162 Concrete Buildings Maintenance &   Management
10 – 14/7/2010
Cairo
2990
IT163 Process Plant Troubleshooting & Engineering Problem Solving
10 – 14/7/2010
Cairo
2990
IT164 Troubleshooting Plant Rotating Equipment and Effective Predictive Maintenance
10 – 14/7/2010
Cairo
2990
IT165 Process Plant Start up & Commissioning
10 – 14/7/2010
Cairo
2990
IT166 Reliability, Availability & Maintainability (RAM)
10 – 14/7/2010
Cairo
2990
IT167 Integrated Contingency Planning for Industrial Emergencies (ICP)
10 – 14/7/2010
Cairo
2990
IT168 Circuit Breakers Operations & Maintenance
11 – 15/7/2010
Abu Dhabi
3200
IT169 Power Generation: Gas Turbines, Steam Power Plants, Co-Generation & Combines Cycle Plants: Selection, Applications, Operation, Maintenance & Economics
17 – 28/7/2010
Cairo
5500
IT170 Corrosion Inhibition Principles & Management
17 – 21/7/2010
Cairo
2990
IT171 Fire Risk Assessment, Safety & Emergency Planning
17 – 21/7/2010
Cairo
2990
IT172 Machinery Vibration Monitoring & Analysis
17 – 21/7/2010
Cairo
2990
IT173 Electric Distribution System Equipment Preventive Maintenance (EPM) and Engineering Principles
17 – 21/7/2010
Cairo
2990
IT174 Rotating Equipment Reliability Optimization & Continuous Improvement
17 – 21/7/2010
Cairo
2990
IT175 Implementing Best Practices in Multi-Shift Operations: Maximizing Productivity Through Round-The-Clock Operations
17 – 21/7/2010
Cairo
2990
IT176 Accident & Incident Investigation Analysis
18 – 22/7/2010
Abu Dhabi
3200
IT177 Practical Valve Technology: Selection, Operation, Maintenance & troubleshooting
18 – 22/7/2010
Abu Dhabi
3200
IT178 Safety Instrumentation System for Process Industry in Oil & Gas
24 – 28/7/2010
Cairo
2990
IT179 Maintenance Planning Scheduling & Work Control
24 – 28/7/2010
Cairo
2990
IT180 Pumps & Compressors Operation Maintenance & Troubleshooting
24 – 28/7/2010
Cairo
2990
IT181 Electrical Faults Causes Analysis Detection & Remedies
24 – 28/7/2010
Cairo
2990
IT182 Root Cause Failure Analysis & Reliability Improvement
25 – 29/7/2010
Abu Dhabi
3200
IT183 Maintenance Technology Best Practices: Inspection, Analysis & Monitoring
31/7 – 4/8/2010
Cairo
2990
IT184 The Advanced Rotating Equipment Troubleshooting
31/7 – 4/8/2010
Cairo
2990
IT185 Process Equipment Design for Refineries Petrochemical & Related Process Plants
31/7 – 4/8/2010
Cairo
2990
IT186 Practical Machinery Vibration Monitoring, Analysis & Predictive Maintenance
31/7 – 4/8/2010
Cairo
2990
IT187 Power System: Computerized Protection, Automation, Economic Operation & Load Dispatch
31/7 – 4/8/2010
Cairo
2990
IT188 Preventive Maintenance Planning Metrics & Benchmarking
1 –5/8/2010
Abu Dhabi
3200
IT189 Centrifugal Compressor & Steam Turbines Design, Operations and Maintenance
1 –5/8/2010
Abu Dhabi
3200
IT190 Pumps & Valves: Maintenance, Inspection & Troubleshooting
25 – 29/9/2010
Cairo
2990
IT191 Facilities Preventive & Predictive Maintenance Management Workshop
25 – 29/9/2010
Cairo
2990
IT192 Maintenance & Inspection of Utility Piping Network 
25 – 29/9/2010
Cairo
2990
IT193 Chemical Engineering for Non-Chemical Engineers
25 – 29/9/2010
Cairo
2990
IT194 Value Engineering – Performance and Cost Optimization
25 – 29/9/2010
Cairo
2990
IT195 Practical Pump Technology: Selection, Operation and Maintenance
25 – 29/9/2010
Cairo
2990
IT196 Advanced Engineering Management & Maintenance Techniques
26 – 30/8/2010
Abu Dhabi
3200
IT197 Health & Safety Management in the Oil & Gas Industries (Best Practice)
2 – 6/10/2010
Cairo
2990
IT198 Pumps: Selection, Operation, Testing, Troubleshooting & Maintenance
2 – 6/10/2010
Cairo
2990
IT199 Metallurgy Corrosion & Prevention of Failures
2 – 6/10/2010
Cairo
2990
IT200 OSHA Standards for Safety, Loss Prevention, Fire & Protection Professionals
2 – 6/10/2010
Cairo
2990
IT201 Maintenance Support Design/Redesign (MSDR)
2 – 6/10/2010
Cairo
2990
IT202 Piping Design, Construction and Mechanical Integrity Training
2 – 6/10/2010
Cairo
2990
IT203 Preventive Maintenance of Electric Equipment
3 – 6/10/2010
Abu Dhabi
3200
IT204 Design & Selection of Air Conditioning Units (Practical Application)
9 – 13/10/2010
Cairo
2990
IT205 Rotating Equipment – Predictive & Preventive Maintenance
9 – 13/10/2010
Cairo
2990
IT206 Hazardous Area Classification & Intrinsic Safety  
9 – 13/10/2010
Cairo
2990
IT207 LV & HV Switchgear Selection, Maintenance & Control
9 – 13/10/2010
Cairo
2990
IT208 Maintenance Management: Parts & Materials and Inventory Control Process Stages 
9 – 13/10/2010
Cairo
2990
IT209 Industrial Equipment: Compressors, Pumps, Motors & Variable Speed Drive: Selection, Sizing, Application
9 – 13/10/2010
Cairo
2990
IT210 Advanced Process Risk Assessment & Risk Management
9 – 13/10/2010
Cairo
2990
IT211 Loss Prevention & Safe Working Practice
10 – 14/10/2010
Abu Dhabi
3200
IT212 Construction Tendering; Preparation, Submittal, Analysis & Award
16 – 20/10/2010
Cairo
2990
IT213 Planning, Design, & Performance of the Electric Power Distribution Systems
16 – 20/10/2010
Cairo
2990
IT214 Pipeline Pigging: Technical & Operational Aspects
16 – 20/10/2010
Cairo
2990
IT215 Advanced Techniques for Effective Preventive & Predictive Maintenance
16 – 20/10/2010
Cairo
2990
IT216 Machinery For Process Industry (Operation, Maintenance & Inspection of Rotating Machinery) 
16 – 20/10/2010
Cairo
2990
IT217 Emergency Shutdown Procedures
16 – 20/10/2010
Cairo
2990
IT218 Gas Transmission & Distribution Piping Systems
16 – 20/10/2010
Cairo
2990
IT219 Operation & Maintenance of Steam Turbines
17 – 21/10/2010
Abu Dhabi
3200
IT220 Process Plant Start-Up, Commissioning & Troubleshooting
17 – 21/10/2010
Abu Dhabi
3200
IT221 Power System Protective Relaying
17 – 21/10/2010
Abu Dhabi
3200
IT222 Maintenance & Fault Finding of Central Air Conditioning Units and Chillers 
23 – 27/10/2010
Cairo
2990
IT223 Mechanical Seals & Packing
23 – 27/10/2010
Cairo
2990
IT224 Centrifugal Compressor and steam Turbines – DESIGN, OPERATION & MAINTENANCE
23 – 27/10/2010
Cairo
2990
IT225 Measuring & Improving Power Plant Efficiency
23 – 27/10/2010
Cairo
2990
IT226 Advanced Valve Technology: Design, Selection, Installation, Applications, Sizing, Inspection, Maintenance & Troubleshooting
23 – 27/10/2010
Cairo
2990
IT227 CMMS Computerized Maintenance Systems- Advanced
23 – 27/10/2010
Cairo
2990
IT228 Advanced Technology of Pipeline Design, Construction & Mechanical Integrity 
23 – 27/10/2010
Cairo
2990
IT229 Gas Processing, Treatment & Sulphur Recovery
23 – 27/10/2010
Cairo
2990
IT230 Heat Exchanger Design, Performance, Inspection Maintenance & Operation
24 –28/10/2010
Abu Dhabi
3200
IT231 Heat Exchanger Design, Performance, Inspection, Maintenance & Operation
30/10 – 3/11/2010
Cairo
2990
IT232 Hazard Identification, Risk & Control
30/10 – 3/11/2010
Cairo
2990
IT233 Pumps & Turbines Maintenance
30/10 – 3/11/2010
Cairo
2990
IT234 Advanced Mechanical Maintenance Planning Control & Implementation
30/10 – 3/11/2010
Cairo
2990
IT235 Preventive & Predictive Maintenance for Overhead Lines
30/10 – 3/11/2010
Cairo
2990
IT236 Troubleshooting Plant Rotating Equipment and Effective Predictive Maintenance
30/10 – 3/11/2010
Cairo
2990
IT237 Machinery Root Cause Failure Analysis
30/10 – 3/11/2010
Cairo
2990
IT238 Maintenance Planning, Control & Documentation
31/10 – 4/11/2010
Abu Dhabi
3200
IT239 Quantity Surveying for Engineering Projects
6 – 10/11/2010
Cairo
2990
IT240 Transformer Operation, Maintenance & Testing
6 – 10/11/2010
Cairo
2990
IT241 Bearings Selection & Troubleshooting
6 – 10/11/2010
Cairo
2990
IT242 Welding Metallurgy, technology & Inspection
6 – 10/11/2010
Cairo
2990
IT243 HVAC Performance Evaluation & Improvement of Reliability for Based Maintenance Systems
6 – 10/11/2010
Cairo
2990
IT244 Feeder Identification & Distribution Cables Tracing & Fault Location
6 – 10/11/2010
Cairo
2990
IT245 Reading & Interpretation of Mechanical Engineering Drawings
6 – 10/11/2010
Cairo
2990
IT246 Advanced Heating, Ventilation and Air-Conditioning Systems (HVAC): Design, Installation and Maintenance
6 – 10/11/2010
Cairo
2990
IT247 Hazard Identification & Assessment: Qualitative and Quantitative Methods
27/11 – 1/12/2010
Cairo
2990
IT248 Circuit Breakers Operations & Maintenance
5 – 9/12/2010
Abu Dhabi
3200
IT249 Design & Inspection Of Refractory Materials for Refineries, Power Generation & Petrochemical Plants
11 – 15/12/2010
Cairo
2990
IT250 Metallurgy, Corrosion & Prevention of Failures
11 – 15/12/2010
Cairo
2990
IT251 Power Transformers: Design, Manufacture, Testing, Operation & Maintenance
11 – 15/12/2010
Cairo
2990
IT252 Piping Vibration Analysis & Practical Engineering Solutions
11 – 15/12/2010
Cairo
2990
IT253 Mechanical Integrity & Reliability in Refineries, Petrochemical & Process Plants
11 – 15/12/2010
Cairo
2990
IT254 Preventive & Productive Maintenance for Overhead Lines
12 – 16/12/2010
Abu Dhabi
3200
IT255 Accident Investigation Procedures and Root Cause Analysis(RCA)
12 – 16/12/2010
Abu Dhabi
3200
IT256 Fault Analysis in Service Networks and Electric Industrial Networks
12 – 16/12/2010
Abu Dhabi
3200
IT257 Natural Gas Processing, Gas Sweetening & Sulphur Recovery
18 – 22/12/2010
Cairo
2990
IT258 Advanced Steel Structure Design, Construction & Inspection
18 – 22/12/2010
Cairo
2990
IT259 Cathodic Protection- Theory, Design Installation, Commissioning and Trouble Shooting
18 – 22/12/2010
Cairo
2990
IT260 The Advanced Rotating Equipment Troubleshooting
19 – 23/12/2010
Abu Dhabi
3200
IT261 Safety Management & Emergency Response
19 – 23/12/2010
Abu Dhabi
3200
IT262 Advanced Materials for Construction & Repair of Concrete Structures
25 – 29/12/2010
Cairo
2990
IT263 Process Plant Shutdown and Turn Around
25 – 29/12/2010
Cairo
2990
IT264 Thyrstor Applications in Power Distribution & Motor Speed Control
25 – 29/12/2010
Cairo
2990
IT265 Power System Operation
25 – 29/12/2010
Cairo
2990
IT266 Natural Gas Processing, Gas Sweetening & Sulphur Recovery
26 – 30/12/2010
Abu Dhabi
3200
IT267 Computerized Advances of Power System Analysis & Design
26 – 30/12/2010
Abu Dhabi
3200